Skip to main content
Back to Blog

Rational iCombi Pro Service Codes: Can You Keep Cooking?

A Rational iCombi Pro shows faults as numbered Service messages. Here is what each one means according to Rational's own instructions, and whether you can still cook while you wait for a technician.

NYC Commercial Kitchen Repair4 min read

A "Service" message with a number on a Rational iCombi Pro is a fault report, and Rational's instructions say to contact a Rational service partner about every one of them. What matters most during service is whether you can keep cooking. Many faults still allow cooking, some restrict you to hot air (convection) only, and gas burner, temperature-limit and some sensor faults stop cooking entirely. You can swipe a message aside. It shrinks to a red symbol at the side of the display.

The codes below come from Rational's iCombi Pro Original Instructions for Use (floor units, 20-half and 20-full size), section 18.5, "Problem resolution". This list is for the iCombi Pro. For other Rational models, check that model's own instructions.

Rational iCombi Pro Service codes

Steam generator

  • Service 10: SC automation is malfunctioning. Cooking possible.
  • Service 11: water intake for the steam generator is malfunctioning. Cooking possible.
  • Service 12: water measurement system is malfunctioning. Cooking possible.
  • Service 13: steam generator water-level detection is malfunctioning. Hot air only.
  • Service 20.8: temperature probe defective. Hot air only.
  • Service 28.4: cooking cabinet temperature limit exceeded. Hot air only.
  • Service 42.1, 46.1: water supply is malfunctioning. 42.1: hot air only. 46.1: cooking possible.
  • Service 43.1: internal water supply is not closing. Hot air only.

Gas units

  • Service 32.1, 32.2, 32.3, 33.1, 33.2, 33.3: the gas burner is faulty. No cooking. Rational's instruction is to close the shut-off valve on the gas line and call your service partner.
  • Service 34.32: internal data communication is faulty. Cooking possible.
  • Service 60: ignition box initialisation is defective. Rational says to switch the unit off and on again, and call if the message is still displayed.

Hot-air heating

  • Service 20.1: temperature probe is defective. No cooking.
  • Service 28.1: steam generator temperature limit exceeded. No cooking.
  • Service 28.2: cooking cabinet temperature limit exceeded. No cooking.
  • Service 34.1, 34.2, 34.4: internal data communication is faulty. No cooking.
  • Service 42.3: water supply is faulty. Steam injection not available.
  • Service 42.6: water supply is faulty. Cooking possible.
  • Service 43.3: internal water supply is not closing. Convection only.

Humidity

  • Service 20.2, 20.4: temperature probe defective. Cooking possible.
  • Service 30: humidity measurement is incorrect. Cooking possible.
  • Service 36, 37: differential pressure sensor defective. Cooking possible.
  • Service 42.2: water supply is faulty. Cooking possible.
  • Service 43.2: internal water supply is not closing. Convection only.

iCareSystem cleaning and care

  • Service 25: not enough water for the iCareSystem.
  • Service 26 / 27: ball valve cannot find the open / closed position. No cooking.
  • Service 34.8: automatic clean does not work. Cooking possible.
  • Service 43.6, 43.4: internal water supply is not closing. Convection only.
  • Service 47.1, 47.2: waste water pump is defective. Cooking possible.
  • Service 48.1, 48.2: circulating pump is defective. Cooking possible.
  • Service 110: error in the SC pump during the automatic clean. No cooking.
  • Service 120: error in water-level recognition during the automatic clean. No cooking.
  • Service 40: not enough care liquid for the iCareSystem. Cooking possible.
  • Service 42.4, 49.1, 49.2: water supply is faulty. Cooking possible.

Notification centre

  • Service 17: unit model is incorrect. No cooking.
  • Service 29: board temperature is too high. No cooking.
  • Service 31.1, 31.2: core probe defective. You can cook, but not with the core probe.
  • Service 34.16, 34.64, 34.400: internal data communication is faulty. Cooking possible.
  • Service 41: steam injection nozzle or pipe has scale. Steam injection not available.
  • Service 50: real-time clock on the CPU isn't initialised. Set the date and time. Cooking possible.
  • Service 51: battery is defective. Cooking possible.
  • Service 52.1, 52.2: cabinet lighting not working correctly. Cooking possible.
  • Service 72: a temperature probe's activation temperature was exceeded. No cooking.

What's safe to try before calling

Rational's instructions allow only a few operator actions. Everything else goes to a service partner:

  1. Write down the full code, the serial number and the software version. Rational asks you to have these ready, and the error message shows them.
  2. Keep cooking where the list allows. Swipe the message aside and switch to hot air or convection if the code limits you to that.
  3. Service 60: switch the unit off and on again once. If the message is still there, call.
  4. Service 50: set the date and time in the settings.
  5. Service 41: Rational's care section describes descaling the steam nozzle. Switch the unit off, remove the nozzle with a hex key, soak it in descaler, rinse it, let it dry and refit it. Rational requires a mask and chemical-protective gloves for this. If you're not equipped, leave it for the technician.
  6. Gas burner codes (32.x, 33.x): do only what Rational says, which is close the gas shut-off valve. Don't try to relight or reset anything on the gas side.

When to call a technician

Rational's instructions say to contact a service partner about all error messages. Treat these as urgent:

  • Any code marked "No cooking", especially gas burner faults, temperature-limit codes (28.x, 72), board over-temperature (29) and probe failures (20.1).
  • Water codes that keep you on hot air only during a steam-heavy service.
  • Cleaning faults (26, 27, 110, 120) that leave the oven unusable.

Get your combi back in service

Our technicians repair Rational and other combi and convection ovens for restaurants across Manhattan and Brooklyn, with 24/7 emergency service, and pricing is confirmed before any work starts. Tell us the full Service code, serial number and software version when you book.

Request service or see our convection and combi oven repair page.

Need Help With This?

Our licensed team is ready to help. Explore our services or request a technician.

Related Articles